CATV & Broadcast Transmission
CATV is a 75Ω system with three segments: node-to-building trunk, in-building distribution, and the subscriber drop. QR series aluminum tube cable serves the trunk with low loss and strong shielding; RG6 or SYWV-75-5 handles the drop, where flexibility, cost and installation speed matter most. Foaming ratio drives attenuation and shield construction drives immunity — compare those two before comparing model names.

How the link is put together
Optical to RF conversion; everything downstream is a 75Ω coaxial network.
QR series aluminum tube cable — a solid aluminum outer conductor gives low loss and does not degrade like a loose braid.
Taps and splitters with RG11 or RG6; watch the cumulative return loss at every stage.
Tri-shield RG6 or SYWV-75-5 in conduit, with a bend radius of at least 5× the outer diameter.
What to specify
Fill these in and any supplier can quote the same basis — which is exactly why we publish them.
| Impedance | 75Ω ± 3Ω |
|---|---|
| Trunk choice | QR320 / QR540 aluminum tube, approx. 4.4 / 2.9 dB per 100 m at 1 GHz |
| Drop choice | Tri-shield RG6 (braid + dual foil) or SYWV-75-5 |
| Shielding | ≥ 90 dB with tri-shield construction |
| Return loss | ≥ 20 dB from 5 to 1000 MHz |
| Jacket | PE for outdoor aerial, PVC or LSZH indoors |

QR320 Aluminum Tube Cable

QR320M Messenger Aluminum Tube Cable

QR412M Messenger Aluminum Tube Cable

QR412 Aluminum Tube Cable
Questions we get asked
What is the difference between RG6 and SYWV-75-5?
Both are 75Ω with a roughly 7 mm outer diameter; the difference is construction and foaming. RG6 usually uses tri-shield (braid plus foil) for higher shielding in noisy buildings, while SYWV-75-5 is simpler and cheaper, which pays off on short video and distribution runs.
Can the trunk run above 1 GHz?
Yes. The aluminum tube construction of the QR series has a cutoff frequency well above 1 GHz, with variants for 1.2 and 1.8 GHz; braided cables lose ground faster above 1 GHz and are not recommended for long trunks.
Can you supply custom drum lengths and connectors?
Yes. Standard drums are 100, 200 and 500 m, and project lengths can be cut to order. Assemblies can be pre-fitted with F-type or 5/8" connectors, crimped in the factory and coiled for shipment.
Need a quotation?
Send us your specification and we will reply within one working day.